Brake caliper, front
Brake caliper, front |
1. |
Raise the car and remove the wheel.
|
2. |
Press in the brake piston with a pair of slip-joint pliers.
|
3. |
Depress the brake pedal slightly, using a brake pedal clamp.
|
4. |
Remove fuse number 1.
|
5. |
Detach the brake hose from the brake caliper. Plug the hose and the caliper.
|
6. |
Remove the two brake caliper retaining bolts and lift off the caliper.
|
To fit |
1. |
Fit the brake caliper in place. Apply
74 96 268 Thread locking adhesive
and tighten the two retaining bolts.
Tightening torque: 140 Nm +45° (103 lbf ft 45°) |
2. |
Fit the brake hose to the brake caliper and tighten to torque.
Tightening torque 40 Nm (29 lbf ft)
|
3. |
Remove the brake pedal clamp and put back the fuse.
Bleed the brake system, see Bleeding the brake system . |
4. |
Fit the wheel; see
Wheels
.
Tightening torques aluminium wheel 110 Nm (81 lbf ft) steel wheel 50 Nm +2x90°, max. 110 Nm (37 lbf ft +2x90°, max. 81 lbf ft) |
5. |
Lower the car and depress the brake pedal to press out the brake pistons. Check the brake fluid level and top up as necessary.
|