SAAB WIS ONLINE

Brake servo, RHD

Brake servo, RHD

To remove



1. Remove the master cylinder, see .

2. Remove the wiper arms and cover panel over the wiper mechanism.

3. Disconnect the vacuum hose from the brake servo.

4. Remove the crankcase breather valve and its hoses to provide more working space.

5. Undo the brake servo bracket's retaining bolt and two retaining nuts from the front bulkhead partition.

6. Remove the cover panel under the dashboard.


7. Unhook the brake pedal return spring.

8. Remove the clip and the pedal's through pin.

9. Lift out the brake servo.

10. If fitting a replacement unit, transfer the bracket to the new brake servo.


To fit



1. Correctly position the brake servo bracket and tighten the retaining bolt and two retaining nuts.

2. Fit the crankcase breather valve and hoses.

3. Connect the vacuum hose to the brake servo.

4. Fit the cover panel and wiper arms.

5. Fit the master cylinder, see .

6. Fit the through pin and circlip and hook the return spring in place.