Recirculation Flap

/ 9-5 (9600) / 2005 / 8. Body / Automatic Climate Control, ACC / Adjustment/replacement / Recirculation Flap

To remove

1.	Remove the glove box. See Glove box . Remove the side trim on the centre console.

2.	Remove the recirculation flap screws. Pull the motor straight down.

3.	Remove the connector.

To fit

1.	Lubricate the linkage arm with 32 025 041 Silicone grease . Lift up the recirculation flap using a screwdriver. Put the recirculation motor in place and fit its bolts.

2.	Connect the contact.

3.	Replace the side trim on the centre console. Fit the glove box. See Glove box .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.