Front bumper shell bracket

/ 9-5 (9600) / 2005 / 8. Body / Body / Adjustment/replacement / Front bumper shell bracket

Removing

1.	Remove the bumper. See Front bumper

2.	Loosen the 2 bolts of the high-pressure washer.

3.	Remove the 4 bolts of the bracket.

4.	Loosen the clip to the cable trunk.

5.	Remove the bumper shell bracket.

Fitting

1.	Place the bumper shell bracket in its correct position. New illustration.

2.	Fit the clip to the cable trunk.

3.	Fit the bolts.

4.	Fit the bolts of the high-pressure washer.

5.	Fit the bumper. See Front bumper

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.