Part of rear frame member
|
|
Part of rear frame member
|
The rear bumper abutment and rear floor should be removed when the frame member is to be changed.
|
Important
|
|
The frame member must only be cut and joined behind the marking as shown. If the damage extends further, the entire frame member must be replaced.
|
|
|
|
1.
|
Cut away the frame member and remove it.
|
|
1.
|
Cut the spare part so that it fits against the existing frame member in the body.
|
|
2.
|
Fit the spare part and fixate with a couple of welding clamps.
|
|
3.
|
Adjust the exact position of the frame member using the alignment bench measuring system.
|
|
4.
|
All-weld the spare part to the frame member in the body.
|
|
6.
|
Fit the rear floor and rear plate.
|
|
7.
|
Apply primer to all bare metal surfaces.
|
|
8.
|
Seal joints and seams with sealant.
|
|
9.
|
Apply PVC substitute on the underside of the floor.
|
|
10.
|
Apply a thin layer of anti-corrosion agent into members and cavities.
|
