D pillar trim, 5D
| D pillar trim, 5D |
| 1. |
Detach the rear roof covering so that clearance for the D pillar trim is obtained.
|
|
| 2. |
Detach the D pillar trim by pulling it forwards (towards the front of the car), fastened with clips.
|
|
| To fit |
| 1. |
Press the D pillar trim into place. Adjust the weatherstrip over the edge of the D pillar trim.
|
|
| 2. |
Press the rear roof covering into place.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
