Oil pump seal ring, replacement
Oil pump seal ring, replacement |
To remove |
1. |
Remove the timing belt. See
Timing belt (in situ)
.
|
2. |
Remove the timing belt gear using
32 025 006 Crankshaft holder
together with
83 95 360 Holding tool, crankshaft pulley
.
|
3. |
Remove the oil pump seal ring by prising it out of the oil pump with a suitable tool. Make sure that the sealing surfaces are not damaged.
|
4. |
Clean the sealing surfaces.
|
To fit |
1. |
Moisten the gasket's seal lip with a little silicone paste (white) and fit the oil pump seal ring. Use
32 025 014 Fitting tool, oil pump seal
.
|
2. |
Fasten the timing belt gear to
32 025 006 Crankshaft holder
.
|
3. |
Fit the timing belt gear using
32 025 006 Crankshaft holder
together with
83 95 360 Holding tool, crankshaft pulley
.
Tightening torque: 340 Nm (251 lbf ft) |
4. |
Remove the special tools.
|
5. |
Fit the timing belt. See
Timing belt (in situ)
.
|
6. |
Check the engine oil level. Top up as necessary. See
Recommended oil grade
.
|