Oil sump insulation

/ 9-5 (9600) / 2006 / 2. Engine / Basic engine, 4-cylinder diesel / Adjustment/replacement / Oil sump insulation

To remove

1.	Raise the car.

2.	Remove the lower engine cover.

3.	Remove the belt circuit's cover.

4.	Remove the bolt and metal clips holding the insulation in place. Use a small screwdriver to unscrew the metal clips.

5.	Remove the insulation.

To fit

1.	Position the insulation.

2.	Fit the metal clips and the bolt by pressing them into place.

3.	Fit the belt circuit's cover.

4.	Fit the lower engine cover.

5.	Lower the car.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.