Crankshaft position sensor (345)
Crankshaft position sensor (345) |
To remove |
1. |
Raise the car. Remove the lower engine cover.
|
2. |
Unplug the position sensor connector.
|
3. |
Remove the position sensor.
|
To fit |
1. |
Grease the position sensor O-ring with
acid-free Vaseline
and fit it. Take care not to damage the O-ring.
|
2. |
Fit the position sensor.
Tightening torque: 9 Nm (7 lbf ft) |
3. |
Plug in the position sensor.
|
4. |
Fit the lower engine cover. Lower the car.
|
5. |
Connect an exhaust extraction hose and start the engine. Check for oil leaks.
|