SAAB WIS ONLINE

Sensor, intake air (688)

Sensor, intake air (688)

To remove


1. Remove the upper engine cover and insulation.

2. Unplug the sensor connector.


Important

Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection .


3. Remove the sensor.


To fit


1. Lubricate the sensor O-ring with acid-free vaseline .

Important

Be careful not to damage the O-ring.


2. Fit the sensor.

Tightening torque: 9 Nm (7 lbf ft)


3. Plug in the sensor connector.

Important

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .


4. Fit the upper engine cover and insulation.