Speaker, luggage compartment (5D)
|
Speaker, luggage compartment (5D)
|
1.
|
Fold down the right-hand rear seat backrest and remove the side bolster between the rear right door and the backrest.
|
2.
|
Lift out the concealing panel.
|
3.
|
Remove the right-hand storage compartment in the floor.
|
4.
|
Remove the scuff plate by first removing the covers on the right and left-hand sides. Undo the screws securing the scuff plate to the sill. Pull off the scuff plate, it is fastened with clips.
|
5.
|
Remove the rear roof cover and unplug the connections for the lighting.
|
6.
|
Remove the right-hand D-pillar trim and the right-hand concealing panel support (3 screws).
|
7.
|
Remove the five screws in the top of the right-hand side trim and lift out the trim.
|
8.
|
Remove the bass speaker and unplug the connector.
|
1.
|
Plug in the connector to the bass speaker and fit the speaker.
|
2.
|
Position the side trim and tighten the five screws at the top.
|
3.
|
Refit the concealing panel support (3 screws) and the D-pillar trim.
|
4.
|
Fit the rear roof cover and plug in the lighting.
|
5.
|
Press in the scuff plate clips and screw on the scuff plate. Fit the covers over the screws and position the sealing strip over the scuff plate.
|
6.
|
Fit the storage compartment in the floor.
|
7.
|
Lift in the concealing panel.
|
8.
|
Fit the side bolster between the rear right door and the backrest and fold up the rear seat backrest.
|