Opening handle/number plate lighting, 4D

/ 9-5 (9600) / 2006 / 3. Electrical System / Lighting and signalling systems / Adjustment/replacement / Opening handle/number plate lighting, 4D

To remove

1.	Remove the Boot lid trim, 4D.

2.	Remove the Decor panel, boot lid.

3.	Remove the connector.

4.	Remove the nuts.

5.	Remove the unit's screws.

6.	Remove the unit.

To fit

1.	Fit the unit.

2.	Fit the unit's screws.

3.	Tighten the nuts.

4.	Plug in the connector.

5.	Fit the Decor panel, boot lid .

6.	Fit the Boot lid trim, 4D .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.