Control module, OIM, OnStar (5d)

/ 9-5 (9600) / 2006 / 3. Electrical System / OnStar / Adjustment/replacement / Control module, OIM, OnStar (5d)

To remove

1.	Remove the key from the ignition switch.

2.	Remove the cover from the RH side of the luggage compartment.

3.	Unplug the control module connector.

4.	Remove the bracket.

5.	Lift away the control module.

To fit

1.	Place the control module in the correct position.

2.	Fit the bracket.

3.	Plug in the connector.

4.	Fit the cover.

5.	Erase fault codes.

6.	Check that the system is functioning.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.