Steering wheel angle sensor
Steering wheel angle sensor |
To remove |
1. |
Remove the steering column assembly
and put it on a bench.
|
2. |
Mark the steering shaft with a felt-tip pen on both sides of the steering shaft tube.
|
3. |
Pull apart the steering column assembly.
|
4. |
Remove the lock screw.
|
5. |
Carefully press in the catch and remove the bracket.
|
6. |
Remove the circlip and the spring washer.
|
7. |
Dismantle the bearing carrier with bearing.
|
8. |
Remove the steering wheel angle sensor.
|
To fit |
1. |
Fit the steering wheel angle sensor to the shaft. Make sure the groove in the sensor and the heel on the shaft are aligned.
|
2. |
Affix and complete the label.
|
3. |
Fit the bearing carrier with bearing.
|
4. |
Fit the spring washer and circlip.
|
5. |
Fit the bracket.
|
6. |
Fit the lock screw.
|
7. |
Align the marks on both parts of the shaft and carefully press together the steering column assembly.
It should be easy to press together the steering column assembly. |
8. |
Fit the steering column assembly into the car
.
|
9. |
Calibrate the steering wheel angle sensor
.
|