Stepping motor, air-blending LH
Stepping motor, air-blending LH |
To remove |
Put the air-mix control to max cold or max heat before commencing removal.
1. |
LHD:
Remove the bottom of the panel (3 screws) (A) and detach the diagnostics socket (2 screws) and the floor lighting (B).
RHD: Remove the glove box and centre console (A). See Glove box . |
2. |
Uncouple the stepping motor connection (C).
|
3. |
Remove the stepping motor (D), 2 screws.
|
To fit |
1. |
Fit the stepping motor (D), 2 screws.
|
2. |
Couple in the stepping motor connection (C).
|
3. |
LHD:
Fit the diagnostics socket (2 screws) and floor lighting (B).
|
4. |
LHD:
Fit the lower part of the panel (3 screws) (A).
RHD: Fit the glove box and centre console (A). See Glove box . |