Nut piece, rear subframe
Nut piece, rear subframe |
1. |
Remove the mats to expose the floor.
|
2. |
Use a 35 mm hole saw to cut out a hole in the marking.
|
3. |
If necessary, remove the bolt from underneath.
|
4. |
Use a screwdriver to snap the old nut piece out of the holder. Use a pair of pliers or a piece of bent wire to lift out the nut piece.
|
Fitting |
1. |
Fit a new nut piece without plastic holder.
|
2. |
Fit the bolt from underneath.
|
3. |
Apply anti-corrosion agent to the edge and fit a plug, part no. 43 33 498.
|
4. |
Remove all swarf, grinding dust and the like from the floor, using a vacuum cleaner.
|