Boot lid 4D, adjustment

Adjusting the boot lid forwards and backwards

Adjust the boot lid backwards or forwards by loosening the nuts and sliding the lid in the desired direction.

Adjusting the height of the entire boot lid

Adjust the height of the boot lid by loosening the screws holding the hinges to the body and moving the hinges up or down.

Adjusting the front of the boot lid

Loosen the front two screws on the hinges.

Loosen the rear retaining screw just enough to allow the front of the hinge to be adjusted upwards or downwards.

Then tighten the front screw and check fit and function.

Tighten the remaining screws.

Adjusting the rear of the boot lid

The position of the rear of the boot lid when it is closed is determined by the two rubber buffers mounted on it.

Adjust the buffers by screwing them in or out.