Front doors
Front doors |
1. |
Disconnect the wiring harness in the door.
|
2. |
Remove the door stop from the A-pillar.
|
3. |
Unscrew the nut from the lower hinge mounting first.
|
4. |
Unscrew the nut from the upper hinge mounting while supporting the door.
|
5. |
Carefully lift off the door from the hinge mountings.
|
To fit |
1. |
Lift the door onto the hinge mountings.
|
2. |
Screw on the nuts.
|
3. |
Check the fit between the front and rear doors and tighten the nuts.
|
4. |
Fit the door stop to the A-pillar.
|
5. |
Connect the wiring harness in the door.
|
6. |
Check the electrical functions in the door, window lifts, lock, etc.
|
7. |
Connect the diagnostic tool and clear any diagnostic trouble codes.
|