SAAB WIS ONLINE

Bumper shell, front

Bumper shell, front

Removing


1. Raise the car.

2. Remove the front spoiler shield.


3. Lower the car to a suitable work height.

4. Remove the bumper shell bolts at the wing liner on both sides.

Cars with engine block heater: Remove the socket connector, 2 screws and 2 nuts.


5. Detach the shell from the side retainer on the left side. Release the catch with a screwdriver.

6. Cars with headlamp washing : Place a container under the car. Remove the quick-release coupling of the headlamp washer hose. Plug the hole of the washer fluid reservoir connection.

7. Detach the shell from the side retainer on the right side. Release the catch with a screwdriver.


8. Unplug the connector of the front bumper harness.

9. Remove the upper clips of the bumper shell. Remove the bolts.


10. Lift away the bumper shell with the help of an assistant.


Fitting


1. Lift the bumper shell in place with the help of an assistant.

2. Fit the upper clips of the bumper shell. Fit the bolts.


3. Plug in the connector of the front bumper harness on the right side.


4. Press the shell rearward and press the shell into the retainer on the right side.

5. Fit the wing liner bolts on the right side.

6. Cars with headlamp washing : Remove the plug and connect the hose's quick-release coupling to the washer fluid reservoir.


7. Press the shell rearward and press the shell into the retainer on the left side.

8. Fit the wing liner bolts on the left side.

Cars with engine block heater: Fit the engine block heater in the holder and tighten with 2 screws and 2 nuts. The cover must open towards the number plate.

9. Raise the car.

10. Front the front spoiler shield.


11. Lower the car to the floor.