SAAB WIS ONLINE

Scuff plate

Scuff plate

To remove



1. Remove the screw securing the front wing liner to the scuff plate.

2. Unscrew the nut holding the scuff plate to the front wing.

3. Remove the rubber strip.


4. Remove the screws and plastic nuts securing the scuff plate to the body.

5. Remove the lower front plastic nut on the rear wing liner.

6. Prise out the front edge of the wing liner and scuff plate so that the scuff plate comes away from the screw.

7. Lift away the scuff plate.


To fit



1. Prise out the front of the rear wing liner and hang the scuff plate on the screw.

Note

One of the holes in the scuff plate is round and is used as a guide.


2. Position the scuff plate and tighten the screw in the guide hole.

3. Bend the front wing line out of the way and tighten the nut securing the scuff plate to the front wing.


4. Screw on the scuff plate with the screws and plastic nuts.

5. Fit the screw securing the front wing liner to the scuff plate.

6. Fit the rubber strip, starting at the rear of the scuff plate.