Upper rear protective shell, 5D

/ 9-5 (9600) / 2006 / 8. Body / Exterior / Adjustment/replacement / Upper rear protective shell, 5D

Removing

1.	Remove Rear bumper, 5D .

2.	Remove the screws securing the upper protective shell.

3.	Detach the outer section of the protective shell by pulling it forward.

4.	Pull the protective shell from the bumper shell.

Fitting

1.	Press the protective shell into place.

2.	Fit the bolts.

3.	Fit Rear bumper, 5D .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.