(986-2542) Mounting the towbar, modified method
TECHNICAL SERVICE BULLETIN | |
Bulletin Nbr: | 986-2542 |
Date: ........... | MarsĀ 2005 |
Market: | BE, DE, DK, FI, GB, NL, NO, SE |
Mounting the towbar, modified method |
This bulletin advises that the method for fitting the towbar has been modified. This modification takes effect immediately. The installation instructions will be updated continuously with the new information.
Cars affected |
All Saab 9-3 (9440) and 9-5
Background |
There have been instances of white corrosion on the bumper rail in the area where the towbar mounting is located. A layer of protective wax must be applied to prevent this.
Parts required |
09 121 548 Protective wax (sufficient for 20-30 cars)
Procedure |
9-3 (9440)
Before fitting the towbar to the bumper rail, carry out the following procedure:
After fitting the towbar to the bumper rail, carry out the following procedure:
- |
Apply 09 121 548 Protective wax around the contact surfaces of the towbar and reinforcement plates with the bumper rail, so that the joints are sealed in accordance with the marking in the illustration. Applies to both sides of the bumper rail.
|
9-5
Before fitting the towbar to the bumper rail, carry out the following procedure:
After fitting the towbar to the bumper rail, carry out the following procedure:
- |
Apply 09 121 548 Protective wax around the towbar's contact surface with the bumper rail so that the joint is sealed.
|
Warranty/Time Information |