Function check of the autodimming rear-view mirrors
|
|
Function check of the autodimming rear-view mirrors
|
|
Important
|
|
The autodimming mirrors must not be supplied with a voltage greater than 1.5 V. A higher voltage can damage the mirrors. A standard 1.5 V battery can be used to diagnose/test the dimming function.
|
|
|
|
1.
|
Turn the ignition key to the ON position.
|
|
2.
|
Make sure the auto button is depressed.
|
|
3.
|
Place a piece of black tape or hold a finger over the front sensor.
|
|
4.
|
Shine a torch on the rear sensor. The mirror should become gradually darker.
|
|
5.
|
Turn off the torch and remove the tape. The mirror should now become gradually lighter.
|
