Moulding, door trim

/ 9-5 (9600) / 2006 / 8. Body / Interior equipment / Adjustment/replacement / Moulding, door trim

To remove

1.	Remove the handle's cover. Prise off at the front edge using a screwdriver.

2.	Detach the moulding in the rear edge and the moulding's front catches.

3.	Lift aside the moulding.

To fit

Note

Make sure that the retaining clips are in place on the door trim when the moulding is fitted.

1.	Fit the moulding's front catches and press the rear edge of the moulding.

2.	Fit the handle's cover. Start with the upper section.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.