Tailgate trim, 5D
Tailgate trim, 5D |
To remove |
1. |
Open the tailgate.
|
2. |
Remove the window cover plates, x 3, (secured with clips).
|
3. |
Remove the clips in the lower edge and on the sides.
|
4. |
Remove the screws from the grab handle, the handle remains located in the trim.
|
5. |
Pull the upper edge of the trim so that the clips detach.
|
6. |
Extract the locating pin from its hole by moving the trim down slightly.
|
To fit |
1. |
Insert the locating pin in its hole and lift up the trim
|
2. |
Press the upper part of the trim into place.
|
3. |
Screw in the screws around the closing handle.
|
4. |
Fit the clips.
|
5. |
Fit the window cover plates. Fit the side covers first.
|
6. |
Close the tailgate.
|