Motor and sensor, longitudinal adjustment
| Motor and sensor, longitudinal adjustment |
| 1. |
Remove the front seat from the car, see
.
|
|
| 2. |
Unplug the connector (A) for the longitudinal adjustment motor.
|
|
| 3. |
Remove the longitudinal adjustment motor, 2 screws (B).
|
|
| 4. |
Lift the motor from the (C) pinion.
|
|
| To fit |
| 1. |
Refit the motor (C) to the pinion.
|
|
| 2. |
Fit the longitudinal adjustment motor, 2 screws (B).
|
|
| 3. |
Plug in the connector (A) for the longitudinal adjustment motor.
|
|
| 4. |
Fit the front seat, see
.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
