Plates and labels
Plates and labels |
1. |
VIN inside windscreen
|
2. |
Gearbox number
|
3. |
Engine no.
|
4. |
Label for colour codes (body and trim) and tyre pressure
|
5. |
VIN plate
|
6. |
VIN (stamped on body)
|
Fitting a modification identity plate |
As of MY04, the modification identification plate is not factory fitted but is provided in the vehicles Warranty and Service Book. On markets that require the vehicle to be marked, the plate must be fitted as follows:
1. |
Open the bonnet.
|
2. |
Using Teroson FL875, clean the area of the body to which the plate is to be adhered. Remove the protective backing from the plate.
|
3. |
Press the plate into place as illustrated.
|
4. |
Mark the specified box on the plate and close the bonnet.
|