Switching between day/night mode does not take place automatically.
Read the instructions below then start the fault diagnostic procedure.
Symptom: The display does not change its light intensity automatically.
| Switching between day/night mode does not take place automatically. |
Fault symptoms
The display does not change its light intensity automatically.Conditions
Ignition ON.IHU activated.
Day/night mode activated
Diagnostic help
Finding a mechanical or electrical fault.Checking the wiring harness
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits in the wiring harness. Check switches, connectors and crimp connections for oxidation, withdrawn pins and pin clamping force.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
