Setting the time and date
 
  
 
 
  
   
    
     |  | Setting the time and date | 
   
  
  
   
   
    
    
    
    
    
     
      
       | Audio system without CD changer | 
     
    
   
   
    
    
      
    
    
   
   
  
  
   
  
  
   
    
     
      | 2. | Press the menu selection button directly below the menu alternative you wish to change. 
 
 | 
    
   
  
  
   
    
     
      | 3. | Push the menu selection button to increase the time or date one step at a time. The time and date can also be adjusted by pushing the SEEK, FWD or REV buttons. 
 
 | 
    
   
  
  
  
  
  
  
  
   
    
     | Audio system with CD changer | 
   
  
  
   
   
     
   
   
  
  
  
   
  
  
   
    
     
      | 2. | Press the menu selection button directly below the clock symbol on the display. 
 
 | 
    
   
  
  
   
    
     
      | 3. | Press the menu selection button directly below the menu alternative you wish to change. 
 
 | 
    
   
  
  
   
    
     
      | 4. | Push the menu selection button to increase the time or date one step at a time. The time and date can also be adjusted by pushing the SEEK, FWD or REV buttons. 
 
 | 
    
   
  
  
  
  
  
  
  
  
   
  
  
   For RDS time to be available, radio reception must be normal and the current radio station must be transmitting RDS time signals, (CT Clock Time).
   
   
  
  
  
   
    
     
      | - | In the clock menu, press the menu selection button directly below the arrow symbol on the display. 
 
 | 
    
   
  
  
   
    
     
      | - | Press the menu selection button directly below the RDS time menu alternative. 
 
 | 
    
   
  
  
   
    
     
      | - | The clock is now adjusted automatically and the display shows: " Adjusting to RDS time...". If no time information is available or the RDS reception is poor, the display shows: "No RDS time accessible". 
 
 | 
    
   
  
  
  
  
  
  
  
   
    
     | Audio system with navigation | 
   
  
  
   
   
     
   
   
  
  
   Normally the navigation system receives the correct time and date via GPS signals.
   
   
  
  
   Press the button indicating time at the top right of the screen to display today's date for 5 seconds.
   
   
   
    Manual setting
   
  
  
   If the GPS time is incorrect or if there is no GPS signal then the time and date can be adjusted manually.
   
   
  
  
  
   
    
     
      | 1. | Hold the button indicating time, at the top right of the screen, depressed for more than 2 seconds to switch to the menu for setting time. 
 
 | 
    
   
  
  
   
    
     
      | 2. | Adjust the time and date. 
 
 | 
    
   
  
  
  
   
    
     
      | Important | 
     
      | 
        If the battery is, or has been, disconnected then the time cannot be displayed before the audio system has received GPS signals from a satellite. It is not possible to set the clock manually either.
        | 
     
      |  | 
    
   
   
  
  
   
    
     
      | Important | 
     
      | 
        In the service manual the normal handling of the audio system is not dealt with. Detailed information regarding handling can be found in the owner's manual.
        | 
     
      |  |