Control module
Control module |
1. |
Remove lower panel from driver's side.
|
2. |
Remove the fuse cover (To be better able to see what you're doing).
|
3. |
Unplug the connector from on the control module.
|
4. |
Remove 2 screws (Torx 25) holding DICE.
|
5. |
Pull the DICE control module straight out.
|
To fit |
1. |
Fit the control module in place.
|
2. |
Screw tight with 2 screws.
|
3. |
Plug in the connector to the control module.
|
4. |
Refit the fuse cover.
|
5. |
Refit the lower panel.
|
6. |
After the DICE control module is replaced, it must be programmed into the car.
|