Light setting, fog light

/ 9-5 (9600) / 2007 / 3. Electrical System / Lighting and signalling systems / Adjustment/replacement / Light setting, fog light

1.	Measure the distance from the centre of the lens to the floor. Mark a wall (90° straight out from the lamp lens) with a cross at this height.

2.	Turn on the fog lights.

3.	Turn the adjusting screw until the light beam is approximately 1-2% of the distance between the car and the wall below the horizontal of the cross (e.g. 10-20 cm under the cross if the distance to the wall is 10 m).

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.