Adjusting the fuel gauge/sensor
|
Adjusting the fuel gauge/sensor
|
There are two different ways of adjusting the sensor/gauge, depending on the fault symptoms: whether the reading error is "equally large" from full tank to empty tank or whether the reading error occurs only at a certain level. Adjustment of the fuel level sensor offset or, alternatively, the fuel gauge reading, is possible.
Alternative 1. Gauge reading error across the whole scale.
|
-
|
The Read Value should be 0 litres.
|
2.
|
Turn the ignition switch to OFF.
|
3.
|
Add 10 litres of fuel to the tank.
|
4.
|
Turn the ignition switch to ON.
|
5.
|
Read value Tank Contents. Adjust
Tank offset
to the correct value.
|
6.
|
Activate the fuel gauge and check that the gauge reading is correct at all the "breakpoints". Adjust the breakpoints if necessary. For factory-setting of breakpoints see
.
|
7.
|
Clear the diagnostic trouble codes in all systems.
|
|
•
|
Perform a functional test.
Test OK?
YES
The steps taken to rectify the fault were correct.
NO
Go to
|
Alternative 2. Reading error at a certain level.
1.
|
Activate the fuel gauge and check that the gauge reading is correct at all the "breakpoints". Adjust the breakpoints if necessary. For factory-set breakpoints see
|
2.
|
Clear the diagnostic trouble codes in all systems.
|
|
•
|
Perform a functional test.
Test OK?
YES
The steps taken to rectify the fault were correct.
NO
Go to
|