B1000
Read the instructions below then start the fault diagnostic procedure.
Symptom: The LED on the control button unit shows a red light. The OnStar Call Center (OCC) cannot locate the car.
B1000 |
Fault symptoms
• |
The LED on the control button unit shows a red light.
|
• |
The OnStar Call Center (OCC) cannot locate the car.
|
On-Board Diagnosis
Type of diagnosis:- |
Continuous
|
Enabling criteria:
- |
Ignition ON.
|
Fault criteria:
- |
Internal fault in control module (VCP/GPS).
|
Diagnostic help
The present fault code is erased directly the fault ceases. The historical fault codes are erased after 50 fault free driving cycles.