SAAB WIS ONLINE

Telescope cylinder, headlamp washers

Telescope cylinder, headlamp washers

Removal


1. Remove the upper plastic clip.


2. Pull out the cover using 82 93 474 Removal tool , and hold the nozzle in the drawn out position.


3. Unhook the cover from the washer nozzle.

4. Remove the screws from the wing liner.


5. Free the bumper shell by freeing the hook with a screwdriver. Bend the shell forwards and place a support under so that it is not damaged.

6. Squeeze the washer hose using 30 07 739 Hose pinch-off pliers .


7. Undo the washer hose snap coupling and detach the washer hose.

8. Remove the telescopic cylinder.


Refitting


1. Locate the telescopic cylinder by pushing on the upper edge and secure the cylinder to the bumper shell with the clip.


2. Fit the washer hose and remove the pinch-off pliers.

3. Position the bumper shell correctly.

Note

Ensure that the connector is correctly fitted in its housing.


4. Fit the upper plastic clip.


5. Fit the wing liner bolts.


6. Pull out the washer nozzle and fit the cover.