Washer nozzles, headlamps

/ 9-5 (9600) / 2007 / 3. Electrical System / Wash/wipe systems / Adjustment/replacement / Washer nozzles, headlamps

Removal

1.	Pull out the cover using 82 93 474 Removal tool , and hold the nozzle in the drawn out position.

2.	Unhook the cover from the washer nozzle. Warning Use protective eyewear to prevent eye injuries due to fluid splash.

3.	Remove the washer nozzle with its non-return valve by removing the clip.

Refitting

1.	Fit the clip to the washer nozzle and assemble the washer nozzle onto the telescopic cylinder. Important Check that the clip locks correctly. If not, use a new clip.

2.	Pull out the telescopic cylinder with 82 93 474 Removal tool , and push on the cover securely.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.