Tailgate gas springs 5D
Tailgate gas springs 5D |
1. |
Remove the cover over the hinge member, the D-pillar trim and the two mouldings between the C and D-pillars.
|
2. |
Remove the clips in the roof.
|
3. |
Remove the covers in the cargo net holders and remove the clips. Remove the cargo safety net holders.
Carefully bend down the roof. |
4. |
Remove the sheet metal yoke over the front gas spring mounting. Get an assistant to hold the tailgate.
|
5. |
Unsnap the gas spring from the ball joints.
|
6. |
Remove the gas spring.
|
To fit |
1. |
Lubricate the gas spring ball sockets with Gleitmo 805 (part no. 30 06 442) and press the gas spring into both ball joints.
|
2. |
Fit the metal clip over the ball joint.
|
3. |
Fit the cargo net holders by pressing on the clips and fitting the clips in the roof.
|
4. |
Fit the roof moulding and D-pillar trim.
|