SAAB WIS ONLINE

Rear spoiler, 4D

Rear spoiler, 4D

To remove



1. Open the boot and remove the boot lid trim.

Note

The boot lid trim is fastened with 3-stage rivets. Press in the centre 3 mm and then pull out the hole rivet.


2. Remove the 5 nuts, retaining the washers.

3. Close the boot and carefully lift off the spoiler.


To fit



1. Fit new double-sided adhesive seals on the spoiler if necessary.

2. Carefully position the spoiler so that the screws fit in the holes.

3. Open the boot lid and tighten the 5 nuts on the spoiler.

4. Fit the boot lid trim and close the boot.