SAAB WIS ONLINE

Rear seat head restraint upholstery, 5D

Rear seat head restraint upholstery, 5D

To remove



1. Raise the head restraint as much as possible.

2. Lift out the head restraint by pressing in the catches, one by hand and one by pressing a small screwdriver on the small catch, while pulling out the head restraint.

3. Pull away the plastic cover on the rear of the head restraint, 2 clips, and remove it from the head restraint legs.


4. Lift off the upholstery from the metal tabs and remove it.


To fit



1. Fit the upholstery. Make sure the loose fabric is lying correctly over the whole cushion.

2. Fasten the upholstery over the metal tabs.

3. Fit the plastic cover on the rear of the head restraint and press it in place.

4. Fit the head restraint by holding in the catch and pressing home the head restraint. Take care to keep the legs of the head restraint parallel with each other.


Make sure the lock is functioning.