Side bolster upholstery, 5D
| Side bolster upholstery, 5D |
| 1. |
Remove the side bolster by pulling on the top edge to release the locking tongue, unhooking the bottom locking tongue and lifting away the bolster.
|
|
| 2. |
Open the zipper.
|
|
| 3. |
Remove the upholstery from the side bolster.
|
|
| To fit |
| 1. |
Fit the upholstery onto the side bolster.
|
|
| 2. |
Close the zipper.
Make sure the upholstery is lying correctly. |
|
| 3. |
Fit the side bolster by inserting the bottom tongue and pressing on the top one.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
