Electrically controlled seat cannot be operated when the driver's door is opened
Read the instructions below then
start the fault diagnostic procedure.
Symptom: The seat cannot be operated when the driver's door is opened and the ignition is off.
|
Electrically controlled seat cannot be operated when the driver's door is opened
|
Fault symptoms
The seat cannot be operated when the driver's door is opened and the ignition is off.
Probable cause of fault
Faulty door contact or faulty lead from door contact to TWICE.
Check the wiring
Move the wiring harness at several locations and in different directions to detect intermittent breaks and short-circuits. Observe the multimeter, test lamp or diagnostic tool during the check.