SAAB WIS ONLINE

Test readings, control module connections

Test readings, control module connections




The following pages contain instructions and values for measuring the control module.

Remember:


Observe the test conditions. Use common sense when evaluating test results.

Unless otherwise stated, the test readings presented are with the ignition switch in the ON position.

Check the following points:

- First check that the control module is supplied with current and grounded.

- Then check all sensor inputs and signals from other systems.

- Check the control module outputs last. Remember that the test readings do not indicate whether or not the actuator is working.

If any reading is not OK, consult the wiring diagram to trace the leads, connectors or components which ought to be checked more thoroughly.

The test readings given apply to a correctly calibrated Fluke 88/97.

The test readings show the pulse ratio and pulse duration of the signal. A test instrument capable of measuring both pulse ratio and pulse duration must be used.





Connector 1 (K1), test readings


Pin Pin no. BOB Component/function I nput/Output Test conditions Between X and Y Measurement value (V)
1

1

Power supply (+15 circuit)

Out



1-7

B+

2-3

2-3









4

4

I-bus (+)

In/Out

Ignition ON

4-7

2-3

5

5









6

6

Power supply +30

In

6-7

B+

7

7

Ground

In



7-fuse ground

<0,5

8

8

I-bus (-)

Ignition ON

8-7

2-3



Connector 2 (K2), test readings


Pin Pin no. BOB Component/function I nput/Output Test conditions Between X and Y Measurement value (V)
1

9

Power supply of switch

Out

Ignition ON

1-7(K1)

B+

2

10

Memory button 1

In

Button in neutral

Button depressed

(Ignition ON)

2-7(K1)

0

B+

3

11

Memory button 2

In

Button in neutral

Button depressed

(Ignition ON)

3-7(K1)

0

B+

4

12

Memory button 3

In

Button in neutral

Button depressed

(Ignition ON)

4-7(K1)

0

B+

5-17

13-25









18

26

Memory store button

In

Button in neutral

Button depressed

(Ignition ON)

18-7(K1)

0

B+

19

27

Switch, seat forward

In

Button in neutral

Button depressed

(Ignition ON)

19-7(K1)

0

B+

20

28

Switch, seat rearward

In

Button in neutral

Button depressed

(Ignition ON)

20-7(K1)

0

B+

21

29

Switch, backrest forward

In

Button in neutral

Button depressed

(Ignition ON)

21-7(K1)

0

B+

22

30

Switch, backrest rearward

In

Button in neutral

Button depressed

(Ignition ON)

22-7(K1)

0

B+

23

31

Switch, front edge up

In

Button in neutral

Button depressed

(Ignition ON)

23-7(K1)

0

B+

24

32

Switch, front edge down

In

Button in neutral

Button depressed

(Ignition ON)

24-7(K1)

0

B+

25

33

Switch, rear edge up

In

Button in neutral

Button depressed

(Ignition ON)

25-7(K1)

0

B+

26

34

Switch, rear edge down

In

Button in neutral

Button depressed

(Ignition ON)

26-7(K1)

0

B+





Connector 3 (K3), test readings


Pin Pin no. BOB Component/function I nput/Output Test conditions Between X and Y Measurement value (V)
1

35

Ground, Hall sensor / seat front/rear

In

Ignition ON

1-7(K1)

< 0,5

2

36

Hall sensor / seat front/rear

In

A motor is running

2-1

4-7

3

37

Ground, Hall sensor / backrest front/rear

In

Ignition ON

3-7(K1)

< 0,5

4

38

Hall sensor / backrest front/rear

In

A motor is running

4-3

4-7

5

39

Ground, Hall sensor / front edge up/down

In

Ignition ON

5-7(K1)

< 0,5

6

40

Hall sensor / front edge up/down

In

A motor is running

6-5

4-7

7

41

Ground, Hall sensor / rear edge up/down

In

Ignition ON

7-7(K1)

< 0,5

8

42

Hall sensor / rear edge up/down

In

A motor is running

8-7

4-7

9

43







10

44

Seat forward

Out

Button depressed

Button in neutral

(Ignition ON)

10-7(K1)

B+

0

11

45









12

46

Front edge up

Out

Button depressed

Button in neutral

(Ignition ON)

12-7(K1)

B+

0

13-14

47-48







15

49

Seat rearward

Out

Button depressed

Button in neutral

(Ignition ON)

15-7(K1)

B+

0

16

50







17

51

Front edge down

Out

Button depressed

Button in neutral

(Ignition ON)

17-7(K1)

B+

0

18

52









19

53

Rear edge down

Out

Button depressed

Button in neutral

(Ignition ON)

19-7(K1)

B+

0

20

54

Rear edge up

Out

Button depressed

Button in neutral

(Ignition ON)

20-7(K1)

B+

0

21

55

Backrest rearward

Out

Button depressed

Button in neutral

(Ignition ON)

21-7(K1)

B+

0

22

56

Backrest forward

Out

Button depressed

Button in neutral

(Ignition ON)

22-7(K1)

B+

0