SAAB WIS ONLINE

Cleaning, charge air cooler

Cleaning, charge air cooler

Cleaning, charge air cooler


1. Stand the cooler on edge with the lowest connection at bottom and allow the oil, if any, to run out.


2. Lay down the radiator, plug one of the hose connections and pour in Remover, Tempro 75 or the equivalent. Moves the radiator sideways and at angles in different directions so the remover is spread thoroughly. Empty the radiator and repeat the procedure.

Warning

The product provokes irritation. See the warning text on the packaging.



3. Remove the plug and pour out the cleaning fluid from the cooler using the lowest connection downwards.

4. Place the cooler in an inclined position and rinse it out with hot water. Rinse it alternately from the right and left connections until the water no longer contains any traces of oil.


5. Stand the cooler on edge after rinsing it and allow the water to run out.

6. Finally, blow the cooler dry carefully with compressed air to get rid of any remaining water.