Radiator, 4-cyl.
| Radiator, 4-cyl. | 
| To remove | 
| 
 | |||||||
| 1. | Open the cap on the expansion tank and release the pressure.   | |
| 2. | Raise the car. | |
| 3. | Remove the front lower cover. | |
| 4. | Drain the coolant from the radiator. | |
| 5. | Lower the car to the floor. | |
| 6. | Undo the hose clip on the upper radiator hose.   | |
| 7. | Remove the fan assembly, see
        
         Radiator fan, 4-cyl
        
        . | |
| 8. | For cars with automatic transmission, also remove the connections to the oil cooler on the transmission. 
 | |||||||
| 9. | Loosen the cooling system breather hose. | |
| 10. | Unplug the A/C compressor's connector.   | |
| 11. | Loosen the lower radiator hose from the coolant pump (attached with a hose clamp at the pump).   | |
| 12. | Detach the radiator from the bodywork. | |
| 13. | Remove the radiator. | |
| Note | ||
| If the radiator is to be removed for some time, it should be filled with liquid and the pipe connections plugged. | 
| To fit | 
| Note | ||
| Make sure that the hose clip on the lower radiator hose is situated as high up as possible, close to the coolant pump connection, when fitting the radiator. | ||
| Spray all connectors with Kontakt 61 contact cleaner, part No. 30 04 520. | 
| 1. | Lift in the radiator. | |
| 2. | Fit the radiator to the bodywork.   | |
| 3. | Fit the lower radiator hose from the water pump. | |
| 4. | Plug in the A/C compressor's connector. | |
| 5. | Fit the cooling system breather hose.   | |
| 6. | For cars with automatic transmission, also fit the connections to the transmission's oil cooler. | |
| 7. | Fit the radiator fan,
        
         Radiator fan, 4-cyl. | |
| 8. | Fit the upper radiator hose. | |
| 9. | Raise the car. | |
| 10. | Fit the lower front cover.   | |
| 11. | Close the drain cock for the radiator. | |
| 12. | Lower the car to the floor. | |
| 13. | Switch off the A/C or ACC. Fill with coolant to the MAX level. Do not forget to close the drain plug on the radiator first. Refer to
        
         Coolant
        
        for mixtures. Close the lid. | |
| 14. | Start the engine and run unloaded at varying engine speeds until warm and the radiator fan starts. | |
| 15. | Turn off the engine and top up to the MAX level. | |
| 16. | Check the oil level in the automatic gearbox and top up as necessary. | |
| 17. | Switch off the engine. | |
| 18. | Raise the car. | |
| 19. | Check for any leakage. | |
| 20. | Fit the lower front cover. | |

 Warning
                Warning
                
		