SAAB WIS ONLINE

Mounting, actuator, combustion circulation (403) engine without vacuum tank

Mounting, actuator, combustion circulation (403) engine without vacuum tank

Important

Always use wing covers when working in the engine bay.


To remove


1. Remove the engine cover and insulation. Disconnect the negative battery lead.


2. Disconnect the upper hoses from the oil trap. The right-hand hose has a quick coupling. Hold the black plastic ring and pull the coupling upward.


3. Remove the nuts and bolts holding the oil trap bracket in place and move it aside.

4. Remove the actuator. Carefully prise the control arm off the ball joint. Unplug the actuator's connector.



To fit


1. Plug and fit in the actuator. Press the control arm onto the ball joint using suitable pliers.


2. Reposition the oil trap bracket. Fit the nuts and bolts.


3. Attach the upper hoses of the oil trap.

4. Reconnect the negative cable to the battery.


5. Remove the wing covers and restore the car's electrical functions, see After disconnecting the battery .

6. Connect an exhaust hose and start the engine. Check the function. Connect the diagnostic tool and clear any diagnostic trouble codes.

7. Fit the insulation and upper engine cover.