Checklist for changing turbocharger and engine control module
Checklist for changing turbocharger and engine control module |
Checklist |
1. |
Describe the fault symptom .......................................................................................................................................
.................................................................................................................. ................................................................................................................... |
2. |
Connect Tech 2.
|
3. |
Turn off A/C or ACC and let the engine idle. Coolant temperature should be over 80°C.
|
4. |
Read and note any diagnostic trouble codes: .......................................................................................................................
|
5. |
Select "Engine" - "Trionic" - "Read values / Activate" in Tech 2. Read and note the following values:
|
Unit
|
Turn Ignition On
|
Idle
|
Desired value
|
|
Engine speed
|
rpm
|
-------------
|
800-850
|
|
Airmass/Combustion
|
mg/c
|
-------------
|
||
Coolant temperature
|
°C
|
85-100
|
||
Deviation from calculated air mass
|
%
|
-------------
|
max. 10
|
|
Intake air temperature.
|
°C
|
40-60
|
||
Atmosphere Absolute Pressure
|
kPa
|
90-115
|
||
Charge Air Absolute Pressure
|
kPa
|
95-110
|
||
Manifold Absolute Pressure
|
kPa
|
25-60
|
||
Additive adaptation
|
mg/c
|
max. 0.6
|
||
Multiplicative adaptation
|
%
|
max. 6
|
||
Charge Air Adaptation
|
%
|
max. 10
|
Number of knocks
|
Number of misfires
|
|
No. 1 cylinder
|
||
No. 2 cylinder
|
||
No. 3 cylinder
|
||
No. 4 cylinder
|
Under “system information” you will find information on chassis and version numbers for Trionic T7
Vehicle Identification Number
|
|
Software version
(obligatory)
|
The plate with the engine number is placed on the cylinder block according to WIS - Engine - Base engine, petrol - Technical data - Engine number.
To see the colour of the injectors, remove the upper engine cover.
Engine serial no.
|
|
Fuel injector, colour
|