Relay, limp-home solenoid
|
|
Relay, limp-home solenoid
|
|
1.
|
Remove the pedal bracket cover by undoing the 3 screws. Tilt down the cover and carefully pull it out. Pay attention to the cable for the diagnostic tool data link connector and the lighting.
|
|
2.
|
Undo the screw on the relay box.
|
|
3.
|
Tilt down the relay holder.
|
|
4.
|
Carefully open the catch and remove the relay.
|
|
1.
|
Spray the connectors in the relay holder with Kontakt 61 (part no. 30 04 520) and fit the relay.
|
|
2.
|
Tilt up the relay holder so that the cover closes.
|
|
3.
|
Tighten the screw on the relay box.
|
|
4.
|
Replace the cables to the diagnostic tool data link connector and the lighting. Position the pedal bracket cover and tighten the 3 screws and the clip.
|
