Information
|
Value/Units
|
Off
|
The value depends on the following sensor input, signal or function
|
Position lights
|
ON/OFF
|
DICE
|
Right rear light or Left rear light (bus value from TWICE). SID uses the information to calculate the rheostat level.
|
Rear Fog Light Broken
|
YES/NO
|
DICE
|
The control module powers the output to the lamp. SID uses the information for the CHECK message.
|
LH direction indicators
|
ON/OFF
|
DICE
|
The control module activates the lamp output. SID activates TIC, TAC for direction indicator function.
|
RH direction indicators
|
ON/OFF
|
DICE
|
The control module activates the lamp output. SID activates TIC, TAC for direction indicator function.
|
Sound
|
Sound information
|
DICE, TWICE, ACC, Audio, MIU, PSM, ECM, SPA
|
SID activates the type of sound requested via the bus.
|
LH Rear Light Broken
|
YES/NO
|
TWICE
|
The control module powers the output to the lamps. SID uses the information for the CHECK message.
|
RH Rear Light Broken
|
YES/NO
|
TWICE
|
The control module powers the output to the lamps. SID uses the information for the CHECK message.
|
Left brake light faulty
|
YES/NO
|
TWICE
|
The control module powers the output to the lamp. SID uses the information for the CHECK message.
|
Right brake light faulty
|
YES/NO
|
TWICE
|
The control module powers the output to the lamp. SID uses the information for the CHECK message.
|
High level brake light faulty
|
YES/NO
|
TWICE
|
The control module powers the output to the lamp. SID uses the information for the CHECK message.
|
Brake lights
|
ON/OFF
|
TWICE
|
Brake light switch.
|
Horn
|
0 : 6 : 42 ms
|
TWICE
|
Theft alarm and central locking function. SID uses the information from TWICE and activates the horn for the requested time in ms for acknowledgement on “TSL” locking.
|
Text message
|
Text Information
|
TWICE, ACC, Audio, ECM, TCM, SPA
|
Theft alarm and central locking function. Text information from TWICE concerning the theft alarm function, from the ACC concerning user programming, audio display, and warning for high oil temperature in the gearbox,
|
RDS Time
|
Hours, Minutes, Seconds
|
Audio
|
RDS reception. SID uses the information in the time function (clock).
|
RDS Date
|
1-31
|
Audio
|
RDS reception. SID uses the information in the time function (clock).
|
RDS month
|
January...December
|
Audio
|
RDS reception. SID uses the information in the time function (clock).
|
Vehicle speed
|
km/h, mph
|
MIU
|
Left rear wheel speed. SID uses the information to calculate the trip computer function.
|
Fuel level
|
Litres
|
MIU
|
Fuel level sensor, control module adjustment. SID uses the information for calculations for the trip computer function.
|
Odometer reading
|
km, miles
|
MIU
|
Display value. SID uses the information for calculations for the trip computer function.
|
Fuel consumed since start
|
0-65535 ml
|
ECM
|
Fuel injection function. SID uses the information for calculations for the trip computer function.
|
Engine Running
|
ON/OFF
|
ECM
|
Crankshaft position sensor. SID uses the information to calculate “Engine off time”.
|
Coolant temperature
|
-40 - 215°C
|
ECM
|
Coolant temperature sensor. SID uses the information to calculate DTE.
|
Oil level low
|
ON/OFF
|
ECM (diesel)
|
Oil level sensor. The diesel engine control module sends the message "Low oil level" unit ON when the oil level is low. SID shows the message "Check oil level".
|
Diagnostics communication
|
|
DICE
|
The control module must be under power and the bus lines intact. See Bus and diagnostic communication
.
|