SAAB WIS ONLINE

Light cluster in the boot lid, 4D

Light cluster in the boot lid, 4D

Removal


1. Remove The boot lid trim, 4D

2. Unplug the light cluster connector


3. Remove the rubber plug

4. Remove the nuts.

5. Remove the light cluster by pushing in the clip.


Refitting


1. Check that the seal is correctly positioned and is undamaged. Position the light cluster and push it securely in place.


2. Fit the light cluster nuts.

Tightening torque up to and including M06 10 Nm (7 lbf ft)

Tightening torque from and including M07 8 Nm (6 lbf ft)

3. Fit the plug.

4. Fit the connector.

5. Fit the boot lid trim.


Replacement of lamp bulb


1. RH: Remove the handle.


2. Free the trim on the appropriate side.

3. Remove the bulb socket by rotating it.


4. Remove and change bulb.

5. Fit the bulb socket by rotating it.


6. RH: Fit the handle.


7. Fit The boot lid trim, 4D .