Adjusting the handbrake shoes
|
Adjusting the handbrake shoes
|
Check the lever travel. If the wheels do not lock on the 4th notch, the handbrake must be adjusted.
1.
|
Release the handbrake.
|
2.
|
Check that the cable is not pulling the actuating levers. If necessary, slacken the cable adjusting nut.
|
3.
|
Using a screwdriver, unscrew the adjuster until the brake disc is blocked.
|
4.
|
Then, unscrew the adjuster until the brake disc can be turned.
|
5.
|
Repeat the procedure on the other wheel.
|
6.
|
Fit the wheels, see
Wheels
.
Tightening torques
aluminium wheel 110 Nm (81 lbf ft)
steel wheel 50 Nm +2x90°, max. 110 Nm (37 lbf ft +2x90°, max. 81 lbf ft)
Important
|
The wheel must hang freely when the wheel bolts are being tightened.
|
|
|