SAAB WIS ONLINE

Anti-roll bar

Anti-roll bar

To remove



1. Raise the car and remove the rear wheels.

2. Remove the anti-roll bar retaining nuts and bolts.

3. Remove the anti-roll bar.


To fit



1. If necessary, lubricate the anti-roll bar bushes with Molycote 33 (bushes on new anti-roll bars are already lubricated), position the anti-roll bar and fit all the bolts and nuts.

2. Tighten the nuts and bolts.

Tightening torque 50 Nm (40 lbf ft)

3. Fit the wheels, see Wheels .

Tightening torques

aluminium rim 110 Nm (81 lbf ft)

pressed steel rim 50 Nm +2x90°, max. 110 Nm (37 lbf ft +2x90°, max. 81 lbf ft)

4. Lower the car to the floor.